Production Time

Production time is based on receiving your order with valid method of payment and design information. On orders where you have requested Samples and Pre-Production Proofs, the production timing begins when we receive your approval. All times reflect business days.

We can normally produce and ship your item within the quoted time. When there is a problem with producing an item within the quoted time, we will notify you.

Minimum Quantities and Less than Minimum orders

Minimum quantity requirements vary from manufacturer to manufacturer. In cases where a manufacturer's minimum order requirement exceeds your requested quantity, a Promo-promo.com Specialist will assist you. Short production runs can be arranged (at a higher cost per unit) and our team is happy to provide a special quote or other recommendations to get you the right product. Please contact us.

Need to know what size fits? The chart below provides translations of sizes for you to use in planning your wearable purchases.

This information is provided as a general guide and should not be considered a guarantee of fit for all products. Garment sizes may vary slightly among manufacturers. If you have specific questions or requirements, please contact us.

Decorating Terms

Branding:
A hot die imprint usually burned into leather or wood.

Deboss:
Machine presses a die into the surface of the material, resulting in a depressed imprint.

Deboss with Colorfill:
Combination of the Deboss and color, deboss then filled.

Decal:
Artwork is produced on a transparent decal, then applied to product.

Die Struck:
A reverse die is made of the imprint, then machine struck onto the metal surface. Die struck pieces are predominantly metal (lapel pins, etc.) and may be color filled.

Emboss:
Machine presses a die into the surface of the material, resulting in a depressed area around the imprint desired. Imprint appears to be raised.

Embroidery:
Logo is digitized into a "tape". Machine reads tape to stitch logo onto surface of product. Usually includes up to 5 colors of threads in one logo. Pricing is based on stitch count. Embroidery cannot be PMS Matched.

Etch and Engraving:
Methods for transferring a design to hard, smooth material such as glass.

Foil Stamp:
(see Hotstamp)

Four Color Process:
Photo-quality full color image is created by laying 4 colors (cyan, magenta, yellow and black) on top of each other.

Hotstamp with Foil:
Heat is used to leave a foil imprint of the design on the surface. Available in a variety of colors but can only be implemented in a single color for the entire design.

Laser Engraving:
Logo is digitized then lasered into hard surfaces such as wood, metal or glass.

Offset Printing:
Is a process of transferring ink from a metal printing plate to a rubber-covered cylinder. Used on more complex artwork and for higher quantity runs.

Pad Print:
Used on oddly shaped products and surfaces. Only one color can be imprinted.

Silkscreen:
Ink is pressed thru a fine screen leaving a flat, painted imprint on the surface of the material.

Sublimation:
Is a heat transfer method of imprint using heat-activated dyes that "sublimate" into the fabric; becoming part of the fabric, not an imprint sitting on top of the fabric.

Industry Terms

Ad Copy:
Lettering imprinted on any item. Usually an advertiser's name, sales message, trademark or slogan.

Artwork:
Any non-typeset drawing, photo, illustration or lettering in an ad.

Bleed:
When an illustration runs all the way to the edges of the page or sheet after it's trimmed.

Boldface:
A heavy typeface used for titles or emphasis.

Camera-ready Art:
Any drawing, photo, illustration or lettering suitable for photographic reproduction.

Color Separations:
The separation of multi-colored original art by camera or laser-scan techniques to produce individual separated colors. There are four common separations: yellow, magenta, cyan and black.

Continuous Tone Art:
Photograph, painting or other piece of art in which black & white tones gradually merge into one another.

Crop:
To eliminate a portion of a picture, illustration or photograph that contains unnecessary material or to highlight a certain area of the image.

DPI:
Dots per inch. Sometimes expressed as pixels per inch. For bitmap images, the number of individual elements of color information per inch.

EPS File:
EPS stands for "Encapsulated Postscript", which is a sophisticated file format for capturing precise image and text information. Because of the mathematical basis for building the format, EPS files are the most reliable method for communicating artwork.

Font:
Used to describe a complete typeset from a particular typeface. Examples include Helvetica, Times New Roman, Arial, etc.

Four-color Process:
A printing process that creates color productions by overprinting screens that individually prints reds, yellows, blues and black. All colors can be represented as a combination of these four.

GIF File:
A type of bitmap image file that Branders.com supports for artwork upload. Files of this type have a .gif suffix.

Halftone:
An image produced by breaking the subject into small dots of varying intensities of gray ranging from white to black.

Illustrator by Adobe:
Adobe® Illustrator® is industry standard illustration software that creates graphically rich artwork for print or the Web. It provides powerful and flexible tools for PostScript®.

Italic:
In type, letter forms that slope to the right.

Kern:
To add or delete space between pairs of adjacent characters. Also known as letterspacing.

Line Art:
Black and white illustration of reproduction quality.

Overrun:
The number of products in excess of the number originally ordered.

Pantone Matching System (PMS):
A color scale used to precisely match color